PRESSING UN-PRESSABLE FABRIC
Helpful when doing Flip and Fold techniques
Some fabrics we use can’t be pressed with an iron. So, we use a “dolly” (a tightly rolled wad of cotton or linen) to transfer the heat from the iron, to the seam, without un-hooping the work. A Dolly is an old tailoring term for rolled up fabric to be used as a pressing aid.
 |
 |
Vinyl and plastic type fabrics can’t endure the heat from an iron but often need pressing during a project (i.e. this flip and fold technique we are using with this bag). Make a Dolly out of five layers of calico (seeded cotton). Each piece was cut about 25cm (10”) long by 10cm (4”) wide. Stack the calico pieces and then rolled them tightly and roughly hand-stitched through the outer layers to prevent the Dolly from un-wrapping.
 |
 |
Place the Dolly under the iron to heat, then transfer that heated surface directly onto the seam that required pressing. Leave the Dolly in place until it cools or move the work to a cold surface to set the seam. Test any foiled PU fabrics first and it’s always a good idea to test press any novelty fabric to ensure you know there will be no surprises!
 |
 |
A Dolly is a great solution for pressing PU leather. Give it a try and let us know how you go in the comments!
6 comments
Erin
Dianne, you definitely could, just be extra careful to make sure the heat doesn’t transfer! We use dolly’s as this is tried and true in our sewing room :)
Dianne Pappagallo
can you use a raja cloth instead
Marina Grobler
Thank you for this very useful idea. I’ve made one Dolly, and my seams with vinyl are laying flat now.
Linda Carroll
I want to make the garden trellis runner and I have purchased your cork. I would like to know what needles I should use in my embroidery machine. I have the brother quattro.
thank you Linda
Rosemary Tucker
Thank you, the item on ironing or heating leather was really helpful.
Patricia Anne Hannon
thankyou for your tip